Bramor rTK

Enduring – Precision!

BRAMOR rTK

The BRAMOR rTK (GNSS PPK – Post Processing Kinematic) UAS is ideally suited for surveying and remote sensing applications that need a quick and industry leading high precision set of results down to sub-centimeter level also in the absence of a grid of ground control points.

The system is comprised of an air and ground segment, consisting of a state of the art GNSS on board receiver and ground base station, the BRAMOR rTK blended wing body modular airframe with a lot of sensor options, a portable and ergonomic rugged ground control station and catapult launcher. The BRAMOR rTK UAS combines high precision autonomous operations with data acquisition, turbulent air penetration and stability with long endurance.


The BRAMOR rTK is the ultimate high productivity tool for global surveying and remote sensing in very remote and less remote areas, with an industry leading endurance of 2,5 hours, an operational ceiling of 5000m AGL and capable of operating in winds of up to 60km/h. Unrivalled.

The airframe is made of advanced composite materials (Kevlar/Carbon/Vectran) that provide a high level of survivability. A high visibility color scheme, strobe and NAV lights are optional. Embedded autonomous flight procedures include an array of fail-safe options based on man-rated standards.

The system consists of the air vehicle with a 24.3Megapixel COLOR, INFRARED, NDVI, HYPERSPECTRAL, MULTISPECTRAL or GAS Spectrometer sensor, a foldable portable takeoff catapult and rugged ground control station. The whole system fits into two rugged transport cases or a single backpack. The system is flight ready in under five minutes and safely operated by single operator/pilot in command.

Equipped with C-Astral high rate GPS and IMU precision data-logging electronics.

Your processing time will be shortened by the ability to acquire same amount of data and consistent overlaps when flying against or with the wind!

»Directly compatible with EnsoMOSAIC, PIEneering, Pix4D, Agisoft Photoscan, Menci Software, or other image processing software solutions.«

 

»Autonomous takeoff, autonomous flight and parachute landing«

Bramor UAS is easy to use; autonomous / automatic takeoff procedure (no manual operation needed) and parachute landing enable ease of use. Training for operators/pilots is short.


Basic Bramor rTK system package consists of:

1. BRAMOR rTK airframe:

  • 1 RGB SONY APS-C sensor 24.3MP including 30mm modified lens, 32GB card
  • 900MHz or 868MHz 1W spread spectrum datalink
  • GNSS RTK receiver and antenna
  • On board imaging control computer with IMU
  • 2 pack Li-Po batteries (4 batteries)

2. KJ-100 GCS:

  • Rugged MILSPEC case
  • VC Control&mission planning software
  • C-Astral GEOpilot surveying mission planning software
  • 900MHz or 868MHz 1W spread spectrum datalink
  • GNSS base station  (optional)              

3. CAT 1 elastic launching system
4. Recovery parachute (2 units) with protective packs
5. Set of basic spares (carbon tubes, small material, 1 extra propeller)
6. Batteries charger (including cables for GCS and Li-Po)
7. Training in Slovenia (excluding lodging & transportation costs)
8. Documentation & Manuals
9. Free Custumer support for 1 year
10. Flight case transportation system


Technical Specifications

Airframe

Wingspan 230 cm
Platform length 96 cm
Center module length 67 cm
Engine Brushless
Onboard power li-po
T/O Weight 4,5 kg

 

Flight

Optimal cruise speed 16m/s
Max horizontal speed 23m/s
Endurance Up to 2,5h 
Command & control RF 868 MHz or 900 MHz 
Command & control range Up to 40 km
Takeoff Autonomous / catapult
Navigation Autonomous / waypoints array
Landing Autonomous / parachute
Emergency failsafe’s User-Pre-program

 

Sensor info

  • RTK and post processing specs
  • Absolute dataset accuracy down to 1.5cm
  • 24.3 Megapixel Camera
  • GSD sub cm @ 70m AGL
  • L1&L2 GNSS Reciever
  • Survey grade GNSS antenna
  • GPS, Glonass, Beidou, Galileo Ready

rTK survey modes:

  • Known point base station
  • Unknown point base station
  • Virtual Reference station
  • Compatible with RINEX Base data

Key features

  • Carbon / Kevlar construction
  • 100% Autonomous
  • Up to 2,5h Endurance
  • Automatic parachute landing
  • Flight over mountain terrain
  • Safe catapult launch
  • Rain proof
  • Wind resistance 60km/h
  • Operational temp -25°C to +45°C

 

        rTK and post processing specs

  • Absolute dataset accuracy down to 1.5cm
  • 24.3 Megapixel Camera
  • GSD sub cm @ 70m AGL
  • L1&L2 GNSS Reciever
  • Survey grade GNSS antenna onboard
  • GPS, Glonass, Beidou, Galileo Ready

 

        rTK Survey modes:

  • Known point base station
  • Unknown point base station
  • Virtual Reference station
  • Compatible with RINEX Base data

Applications

  • DSM, Pointcloud orthophoto mapping, Volume calculations
  • IED detection
  • Change detection
  • Wildfire management and situational awareness
  • Change detection
  • Environmental monitoring
  • Search and rescue
  • Infrastructure control
  • Agriculture
  • Woods and landscape management
  • Ecological monitoring and sensing
  • Flood monitoring
  • Civil defense
  • Civil counter reconnaissance

PHOENIX
4317 N. 16th St., Phoenix, AZ 85016
Phone: (602) 274-2052
Email: info@surveyorssource.com
Web: surveyorssource.com

TUCSON
601 S. Campbell Ave., Tucson, AZ 85719
Phone: (520) 624-4056
Email: info@surveyorssource.com
Web: surveyorssource.com

ALBUQUERQUE
Albuquerque, NM 87123
Phone: (505) 366-7722
Email: eric@surveyorssource.com
Web: surveyorssource.com

Surveying Equipment Distributor Serving the Arizona and New Mexico areas.